Twisted Choppers - Page 7 Of 12 - Twisted Choppers

Showing 145–168 of 277 resultsSorted by popularity

Twisted Choppers Hardtail Sportster Fender Mounting Kit
Rated 5.00 out of 5
$64.95
Complete mounting kit for the Twisted Choppers Sportster hardtail - upper and lower 1/4-inch steel mounts plus all hardware; available in Stock, 200mm, and 250mm.
Twisted Choppers Sprocket Long Sleeve T-Shirt
Rated 5.00 out of 5
Sale! Original price was: $24.95.Current price is: $16.95.32% OFF
Twisted Choppers Sprocket Long Sleeve T-Shirt - 50/50 dryblend Gildan with Twisted Choppers sprocket logo graphics and a tagless design. Available in Small through 3X Large. Made in the USA.
Twisted Choppers Mission Bars Handlebars
Price range: $149.95 through $281.95
USA-made Mission Bars handlebars with 9-inch pull-back and forward riser angle in Chrome, Black, or Uncoated - fits most HD and custom bikes without a batwing fairing; standard HD triple tree riser only.
Twisted Choppers 1 Inch Aluminum Motorcycle Axle Wheel Spacers
Rated 5.00 out of 5
Price range: $5.95 through $10.95
USA-made aluminum 1-inch motorcycle axle wheel spacers available in 17 sizes for precise fitment on custom builds, wheel swaps, and brake rotor repositioning.
Twisted Choppers Custom Length Shift or Brake Linkage
$129.95
Built to your specified center-to-center length from aluminum with male rod ends; available in 1/4-inch, 5/16-inch, and 3/8-inch thread sizes; not returnable.
Twisted Choppers Retro Springer Brake Caliper Kit Wilwood 4-Piston 11.5-Inch USA Made
Rated 5.00 out of 5
$499.95
A complete Retro springer brake kit with polished aluminum bracket and chrome-plated Wilwood 4-piston caliper - fits 3/4-inch axle springers, hardware included.
Twisted Choppers 3/4 x 3/4 Blind-Hole Threaded Mounting Boss 5/16-18 Thread USA Made
Rated 5.00 out of 5
$5.95
USA-made cold-rolled mild steel blind-hole weld-on mounting boss; 3/4 inch diameter x 3/4 inch length with 5/16-18 blind-hole thread; clean threaded anchor for custom builds; sold individually.
Twisted Choppers Barrel Style Round Motorcycle Oil Tank
$199.95
A horizontal-mount barrel style oil tank for custom frames and early model Harley-Davidson motorcycles, available in top or side fill and built from mild steel.
Twisted Choppers Straight External Rear Fender Struts Custom Motorcycle Chopper Bobber
$69.95
Externally mounted straight rear fender struts for choppers, bobbers, and hardtail builds - all mounting hardware included for a complete and removable rear fender installation.
Twisted Choppers Flat Exhaust Port Gaskets for 1984-Up Harley-Davidson Big Twin
Rated 5.00 out of 5
$9.95
Flat exhaust port gaskets for 1984-Up Harley-Davidson Big Twin and 1986-Up Sportster Evolution engines; flat style allows use of torque cones, sold as a pair.
Twisted Choppers Disc Brake Rotor Adapter Bushing 1984-1999 to 2000-Up for Harley-Davidson
$9.95
Adapter bushing for mounting 2000-Up Harley-Davidson disc brake rotors on 1984-1999 wheel hubs; converts hub lip from 1.99 to 2.22 inch. Rotor must have machined adapter recess.
Twisted Choppers TC Flexfit Hat Black
$24.95
Twisted Choppers TC Flexfit Hat in Black features 3D TC embroidery, Flexfit Delta 92/8 polyester spandex construction, and Permacurv visor. Available in Small/Medium and Large/X-Large.
Twisted Choppers Panhead Hookah Exhaust Header for 1948-1965 Harley-Davidson Panhead USA Made
Price range: $419.95 through $699.95
USA-made high-sweep hookah pipe silhouette exhaust header for 1948-1965 Harley-Davidson Panhead engines; available in uncoated, black, or chrome finish with or without baffles; Panhead slip-on flanges not included.
Twisted Choppers Builders Rear Softail Suspension Fender
Rated 5.00 out of 5
$319.95
Hand-spun 13 GA U.S. steel rear fender for Softail-type suspension applications, ships raw and ready to shape; available in 7-inch, 9-inch, and 11-inch widths.
Twisted Choppers Sprocket T-Shirt
Rated 5.00 out of 5
Sale! Price range: $16.95 through $21.9515% OFF
Twisted Choppers Sprocket T-Shirt - 50/50 dryblend Gildan with Twisted Choppers sprocket logo graphics and a tagless design. Available in Small through 3X Large. Made in the USA.
Twisted Choppers Pullover Hoodie
Rated 5.00 out of 5
Sale! Price range: $34.95 through $41.9517% OFF
Official Twisted Choppers Pullover Hoodie in 100% moisture-wicking polyester with logo graphics on front and back. Available in Black, Blue, and Gray, sizes Medium to 3X Large.
Twisted Choppers Weld-On Mounting Tab 3/4 x 1-1/2 Inch Coped 1-1/4 Inch Tube 5/16 Hole USA Made
$4.95
USA-made 1/4-inch steel weld-on mounting tab; 3/4 inch wide x 1-1/2 inch long with 5/16 inch hole; clean anchor point for custom motorcycle brackets and fender mounts; sold individually.
Twisted Choppers Bearing Support Slash Cut Exhaust Header For 1986-2022 Harley-Davidson Sportster
Rated 5.00 out of 5
Price range: $359.95 through $599.95
Wide tire-compatible Slash Cut exhaust header for 1986-2022 Harley-Davidson Sportster, built with outboard bearing supports to clear wide tire kits requiring relocated sprockets.
Twisted Choppers Voltage Regulator Mount for Harley-Davidson Big Twin 1936-1999 USA Made
Price range: $19.95 through $29.95
USA-made from 10-gauge laser-cut steel, this voltage regulator mount fits under the front motor mount on Knucklehead, Panhead, Shovelhead, and Evolution Big Twin engines.
Twisted Choppers Universal Motorcycle Weld-In Petcock Bung
Rated 5.00 out of 5
Price range: $9.95 through $21.95
USA-made weld-in petcock bungs from Twisted Choppers in 22mm or 3/8 NPT thread sizes and three material choices - the right foundation for any custom or restored fuel tank build.
Twisted Choppers Wilwood 2 Piston Rear Brake Caliper Bracket
Price range: $139.95 through $144.95
A direct replacement bracket for the Twisted Choppers Wilwood 2-piston rear brake kit, available in Black or Polished finish for 3/4-inch and 1-inch (25mm) rear axles.
Twisted Choppers Springer Riser Studs 1/2-13 Thread
Rated 5.00 out of 5
$14.95
1/2-13 coarse thread riser studs connecting springer legs to handlebar risers on Harley-Davidson and aftermarket springers; 2-inch length, sold as a pair, made in the USA.
Twisted Choppers Rear Axle for Weld-On Hardtail Sportster Frame
Price range: $129.95 through $144.95
Zinc-plated 1144 stress-proof steel rear axle for Twisted Choppers weld-on hardtail Sportster frames - available in 150mm, 200mm, and 250mm wide tire configurations, made in the USA.
Twisted Choppers Solo Seat Spring Mounting Kit 3/8 Inch Stud Coped for 1-1/4 Inch Tube USA Made
$34.95
USA-made complete spring mounting kit coped for 1-1/4-inch frame tubing; includes mount pair, hairpins, steel washers, and leather washers; 3/8-inch stud and 1-inch boss diameter.

Showing 145–168 of 277 resultsSorted by popularity