Showing 121–144 of 277 resultsSorted by popularity
-
Twisted Choppers 1 Inch Universal Motorcycle Axle Externally Threaded
Price range: $139.95 through $147.95USA-made 1-inch externally threaded universal motorcycle axle for custom choppers and bobbers - available in 5 overall lengths and supplied with mounting hardware. -
Twisted Choppers Springer Rocker Bolt Kit
$39.95Replacement rocker pivot hardware for Twisted Choppers springer front ends; each kit includes a chrome shoulder bolt, oil-impregnated bronze bushing, stainless washer, and jam nut. Sold each, 4 needed per springer. -
Twisted Choppers Seat Pan Kit for 2015-2024 Indian Scout
Sale! $229.95$189.9517% OFFBolt-on seat pan kit for 2015-2024 Indian Scout providing a lower seat height; no modifications needed, works with factory fender. Will NOT fit 2025-Up. Seat covering not included. -
Twisted Choppers Shovelhead Ground Pounder Exhaust Header for 1966-1984 Harley-Davidson Shovelhead
Price range: $469.95 through $774.95USA-made ground pounder exhaust header for 1966-1984 Harley-Davidson Shovelhead engines; available in single-bolt or 3-bolt STD flange, uncoated, black, or chrome finish, and with or without baffles. -
Twisted Choppers Shock Frame Weld-On Mounting Tabs
$24.95Sold as a pair, these 7-gauge steel weld-on tabs with 5/16-inch holes mount a spring shock seat pan to the backbone or seat post on any custom chopper or bobber build. -
Twisted Choppers Behind Bars Handlebars
Price range: $189.95 through $309.95USA-made Behind Bars handlebars in 1-inch DOM tubing, available for standard HD triple trees or aftermarket springer front ends, in Chrome, Black, or Uncoated - will not fit factory HD springers or batwing fairings. -
Twisted Choppers Reduced Reach Handlebars for 2018-2026 Indian Challenger Chieftain Roadmaster
Price range: $349.95 through $449.95USA-made reduced reach handlebars for 2018-2026 Indian Challenger, Chieftain, Roadmaster, and Pursuit move grip positions 3.5 inches closer to the rider using stock cables. -
Twisted Choppers Wilwood 2 Piston Springer Brake Kit Gray
Price range: $299.95 through $319.95Twisted Choppers Wilwood 2 Piston Springer Brake Kit Gray delivers high-performance stopping power on custom springer front ends with 3/4-inch axles. Includes caliper, 11.5-inch rotor, bracket, spacers, and linkage. Gray, Gray Contrast Cut. -
Twisted Choppers Rear Motor Mounting Plate for Harley-Davidson Sportster Engines
Price range: $34.95 through $39.95A rear motor mounting plate for custom 1986-2003 Harley-Davidson Sportster frame builds - available in Full Frame (with voltage regulator provision) or Weld-On Hardtail configurations, made in the USA. -
Twisted Choppers Straight Seat Weld-On Hardtail for 1982-2003 Harley-Davidson Sportster
Price range: $649.95 through $689.95A straight-seat weld-on hardtail for 1982-2003 Harley-Davidson Sportster XL frames - CNC machined and TIG-welded in the USA, available in four configurations by rear wheel size and axle diameter; axle included. -
Twisted Choppers Sportster Top Motor Mount Kit for 1986-2003 Harley-Davidson Sportster
$129.95This USA-made Sportster top motor mount integrates a spring-return key switch and 3-position headlight toggle for 1986-2003 Harley-Davidson Sportster - no relays needed. -
Twisted Choppers Wishbone Legs Springer Front End 1-Inch Import Springers USA Made
$299.95A direct-swap wishbone springer leg conversion kit fitting Hardbody, DNA, Moto Iron, and similar import springers - spring rods and lower bushings included, USA made. -
Twisted Choppers Under Trans Oil Tank For Big Twin Frames
$279.95Purpose-built for Twisted Choppers Big Twin drop-seat frames, this 3-quart under-trans oil tank keeps oil storage hidden beneath the transmission with a clean, low-profile design. -
Twisted Choppers Wide Wishbone Springer Front End – USA Made Custom Forks
Sale! Original price was: $1,733.95.$1,231.95Current price is: $1,231.95.29% OFFCombining wide-stance geometry with the classic wishbone rocker, this USA-made springer is constructed from 4130 chromoly with one-piece through-tree build quality. -
Twisted Choppers Builders Rear Custom Fender Deep Side Wall Fabrication Steel
Price range: $279.95 through $599.95Hand-spun 13-gauge U.S. steel Builders Rear Fender for custom choppers and bobbers. Available in 12 widths to match tire sizes from 130mm to 330mm. Ships raw for custom mounting and finish. -
Twisted Choppers Collector Cover End Cap for Hookah 2 Into 1 Exhaust
$24.95Twisted Choppers weld-on Collector Cover End Cap for Hookah 2-into-1 exhaust. Adds back pressure to the collector and features seven decorative styles. 13-gauge U.S. P&O steel, made in the USA. Cover only, collector not included. -
Twisted Choppers Forward Control Backing Plates for Custom Motorcycles
Price range: $59.95 through $109.95Twisted Choppers Forward Control Backing Plates bolt onto TC forward controls for 2004-2022 Sportster XL and 1984-1999 FXST Softail. Available in Standard and 2 Inch Extended styles in Black, Chrome, and Uncoated. -
Twisted Choppers Custom Billet Key Switch Housing Mount
Sale! Price range: $19.95 through $24.9550% OFFTwisted Choppers Custom Billet Key Switch Housing mounts any standard ignition key switch to virtually any frame location. CNC billet aluminum in Black or Chrome. Universal fit. Made in the USA. -
Twisted Choppers Model 2 Forward Controls for Harley-Davidson 1984-1999 Softail 1957-2022 Sportster
Price range: $489.95 through $649.95USA-made Model 2 forward controls for 1984-1999 Harley-Davidson Softail and 1957-2022 Sportster - available in uncoated, black powder coat, or chrome finishes. -
Twisted Choppers Copper Oil Line 3/8-Inch OD 10-Foot Hardline Tubing
$35.953/8-inch OD copper oil line tubing with .030-inch wall, 10-foot roll, designed for Twisted Choppers hardline oil line kits and custom motorcycle builds. -
Twisted Choppers Replacement MSO for Complete Motorcycle Frames
$40.00Replacement Manufacturer's Statement of Origin for Twisted Choppers complete motorcycle frames; issued with your billing address and frame serial number for $40. -
Twisted Choppers Vault Motorcycle Seat Pan 13-Gauge Hand-Shaped Steel
$29.95A hand-shaped 13-gauge steel seat pan compatible with hard mount, rubber mount, spring shock, and solo seat setups on Harley-Davidson and custom motorcycles - made in the USA. -
Twisted Choppers Black Wide Tire Sprocket Bearing Support For Sportster 1991-2003
$419.95USA-made black sprocket bearing support for 1991-2003 Harley-Davidson Sportster wide tire builds eliminates torque flex under hard acceleration to protect the transmission. -
Twisted Choppers Stretched Dash Console For 2000-2017 Harley-Davidson Softail
Price range: $299.95 through $399.95Stretched dash console for 2000-2017 Harley-Davidson Softail - fits 2000-2015 FXST and 2000-2017 FLST with a 5-inch gauge opening and integrated flip-top ignition cover.
Showing 121–144 of 277 resultsSorted by popularity