Twisted Choppers - Page 10 Of 12 - Twisted Choppers

Showing 217–240 of 277 resultsSorted by popularity

Twisted Choppers Rear Axle Adjuster Retaining Washers Custom Motorcycle Frames
Rated 5.00 out of 5
$29.95
Retaining washers keep rear axle adjusters locked in slotted axle plates on custom motorcycle frames; sold as a matched pair for 3/4-inch and 1-inch axle plate slots.
Twisted Choppers Solo Seat Spring Standoff Slugs 1-3/8 x 1 Inch 1-1/4 Inch Cope USA Made Pair
Sale! $19.95$9.9550% OFF
USA-made mild steel solo seat spring standoff slugs coped for 1-1/4-inch frame tubing; 1-3/8-inch length, 1-inch diameter; offsets springs from frame tube; sold as a pair.
Twisted Choppers Inverted Pill Oil Tank
$239.95
An inverted pill oil tank with internally domed ends for bobber and hardtail builds - mild steel construction, pressure tested, and made in the USA by Twisted Choppers.
Twisted Choppers Nickel-Copper Oil Line 3/8-Inch OD 10-Foot Hardline Tubing
$38.95
3/8-inch OD nickel-copper oil line tubing with .030-inch wall, 10-foot roll, designed for Twisted Choppers hardline oil line kits and custom motorcycle builds.
Twisted Choppers Nickel-Copper Hard Oil Line Kit Custom Motorcycles Choppers
$199.95
Complete nickel-copper hardline oil line kit with 10-foot 3/8-inch OD tubing, bender, cutter, and 12 Vibra-Lok brass fittings; no flaring needed. Made in the USA.
Twisted Choppers Tapered Exhaust Port Gaskets for 1984-Up Harley-Davidson Big Twin
$9.95
Tapered exhaust port gaskets for 1984-Up Harley-Davidson Big Twin and 1986-Up Sportster Evolution engines; tapered design seals better than flat-style gaskets, sold as a pair.
Twisted Choppers Straight Seat Hardtail Kit 180-200mm for 1982-2003 Harley-Davidson Sportster
$1,574.95
Complete straight seat hardtail conversion for 1982-2003 Harley-Davidson Sportster - includes rear fender, oil tank, battery box, seat, and all hardware. Select fender size, axle size, and seat style. Made in the USA.
Twisted Choppers Drop Seat Hardtail Kit 130-160mm for 1982-2003 Harley-Davidson Sportster
$1,595.95
Complete drop seat hardtail conversion for 1982-2003 Harley-Davidson Sportster - includes rear fender, oil tank, battery box, seat, and all hardware pre-mounted. Select fender size and seat style. Made in the USA.
Twisted Choppers Hardtail Sportster Lower Fender Mount
$19.95
Lower fender mount for Twisted Choppers Sportster hardtail kits, machined from 1/4-inch steel with 2-inch hole spacing; available in Stock, 200mm, and 250mm sizes.
Twisted Choppers Forge Halo LED Tail Light Stop Light Chrome Billet Aluminum
$119.95
Chrome billet aluminum Halo LED tail and stop light for custom motorcycles; halo dual-intensity 12V LED cluster with downward license plate LEDs. Dimensions: 2.5 x 2.4 x 1 inch. Made in the USA.
Twisted Choppers Weld-On Frame Fender Mount
$24.95
Weld-on frame mount accepting Twisted Choppers upper hardtail fender mounting plates; 4-inch wide 1/4-inch steel with 3/8-24 threaded holes at 1-1/2-inch spacing.
Twisted Choppers Softail Rear Brake Caliper Kit Chrome
$499.95
Includes a Wilwood 4-piston caliper with chrome finish, pads, and polished aluminum bracket for right-side brake, left-side drive Softail and custom builds with 3/4-inch, 25mm, or 1-inch axles.
Twisted Choppers Transmission Support Plate for Harley Big Twin 5/6 Speed
$29.95
A 3/8-inch steel transmission support plate for custom Big Twin frames - used with any Twisted Choppers 5 or 6-speed Big Twin transmission mounting plate, made in the USA.
Twisted Choppers Diamond Driver Floorboards for 2014-Up Indian Touring Models
Price range: $349.95 through $399.95
Precision-machined driver floorboards for 2014-Up Indian Touring models - available in chrome or black anodized finish, made in the USA for a direct OEM-compatible fit.
Twisted Choppers Rear Axle Adjuster Kit Custom Motorcycle Frames
$23.95
Weld-on boss adjusters allow precise chain tension alignment in custom hardtail and rigid frames; this USA-made kit includes a matched pair of adjusters with all hardware.
Twisted Choppers Fat Bob Ignition Key Switch Weld-On Mount
$29.95
Weld-on mount for Fat Bob side hinge-style Harley-Davidson ignition switches; 3/8-inch steel, tapped 8-32 holes (precision), flush mounts panels up to 12 gauge. Made in the USA.
Twisted Choppers Diamond Driver Floorboards for 1980-2025 Harley-Davidson Touring
Price range: $299.95 through $344.95
Twisted Choppers Diamond Driver Floorboards for Harley-Davidson Touring bolt directly onto FLT/FLH, FLST, FLD, and FL Trike models. Precision-machined billet aluminum in Black or Chrome. Sold as a pair.
Twisted Choppers Octagon Forward Controls for Harley-Davidson 1984-1999 Softail 1957-2022 Sportster
Sale! Price range: $399.95 through $549.9522% OFF
USA-made Octagon forward controls for 1984-1999 Harley-Davidson Softail and 1957-2022 Sportster - available in uncoated, black powder coat, or chrome finishes.
Twisted Choppers Cutaway Rear Custom Fender Reverse Scallop Steel Choppers
Price range: $329.95 through $699.95
Hand-spun 13-gauge U.S. steel Cutaway Rear Fender for custom choppers and bobbers. Available in 12 widths to match tire sizes from 130mm to 330mm. Ships raw for custom mounting and finish.
Twisted Choppers Radius Custom Front Fender 23-Inch Wheel Raw Steel
$249.95
Radius-style raw steel front fender for 23-inch wheels; 5.75-inch wide, 30.75-inch diameter, 13GA CRS. Hand-spun and TIG-welded. Requires paint prep. Made in the USA.
Twisted Choppers Builders Custom Front Fender 23-Inch Wheel Raw Steel
$249.95
Builders-style raw steel front fender for 23-inch wheels; 5.75-inch wide, 30.75-inch diameter, 13GA CRS. Hand-spun and TIG-welded. Requires paint prep. Made in the USA.
Twisted Choppers Halo Side Mount Tail Light License Plate Bracket
Price range: $169.95 through $174.95
Twisted Choppers Halo Side Mount Tail Light mounts through the rear axle with dual-intensity LEDs for running and brake light, plus down-facing LEDs for license plate illumination. Fits 1-inch and 3/4-inch axles.
Twisted Choppers Rear Fender Kit for 2004-2022 Harley-Davidson XL Sportster
Price range: $459.95 through $499.95
A complete rear fender and seat kit replacing the factory Sportster fender - available with or without ECM mount for all 2004-2022 Harley-Davidson XL Sportster models, made in the USA.
Twisted Choppers Sportster Front Motor Mounting Block for 1986-2003 Harley-Davidson Sportster
$34.95
A front motor mounting block for custom frame builds around 1986-2003 Harley-Davidson Sportster XL engines - precision-machined for correct engine placement, made in the USA by Twisted Choppers.

Showing 217–240 of 277 resultsSorted by popularity