S&S Cycle - Page 9 Of 12 - Twisted Choppers

Showing 193–216 of 276 resultsSorted by popularity

S&S Cycle TC3 Oil Pump Screw Kit for 1999-Up Harley-Davidson Twin Cam Big Twin
$11.95
Replace TC3 oil pump fasteners with fresh S&S Cycle hardware for a secure, leak-free pump assembly that maintains full oil pressure on your 1999-Up Twin Cam Big Twin.
S&S Cycle Transmission Countershaft Bearing for 1991-2003 Harley-Davidson Sportster
$50.95
Restore smooth, quiet gear engagement in your 1991-2003 Harley-Davidson Sportster XL gearbox with this S&S Cycle direct-replacement transmission countershaft bearing.
S&S Cycle Torx Pan Head Screw 6-32 x 1/4 Inch Zinc-Plated 10 Pack
$14.95
Precision USA-made S&S Cycle 6-32 x 1/4-inch zinc-plated Torx pan head screws - 10-pack for S&S component assembly and service applications requiring cam-out-resistant Torx drive.
S&S Cycle Backplate Gasket for CV Adapter 0.0625 Inch 10 Pack
$40.95
Keep your shop stocked with S&S Cycle CV adapter backplate gaskets - this 10-pack of 0.0625-inch precision-thickness seals is ideal for regular carburetor service.
S&S Cycle Pump Actuator Lever for Super E and G Carburetors
$14.95
Restore correct accelerator pump stroke on your S&S Super E or G carburetor with this genuine USA-made replacement pump actuator lever from S&S Cycle.
S&S Cycle Pinion Shaft Bushing for 1984-1999 Harley-Davidson Big Twin
$16.95
Restore proper pinion shaft alignment and reduce gear cover friction on your 1984-1999 Harley-Davidson Big Twin with this precision S&S Cycle replacement bushing.
S&S Cycle Oil Pressure Switch for 1984-1999 Harley-Davidson Big Twin
$27.95
Replace the oil pressure switch on your 1984-1999 Harley-Davidson Big Twin with this complete S&S Cycle kit including switch, nut, and lock washer, replacing OEM 26561-84.
S&S Cycle Oil Control Valve for Oil Cooled 2017-Up Harley-Davidson M8
$50.95
Protect your 2017-Up oil-cooled Harley-Davidson M8 from check ball retainer failure with this S&S Cycle oil control valve upgrade, eliminating the stock formed-steel failure point.
S&S Cycle Stock Rocker Box Base Gasket for 1999-2017 Harley-Davidson Big Twin
$40.95
Seal the rocker box base on your 1999-2017 Harley-Davidson Big Twin with this S&S Cycle 2-gasket set for S&S Super Stock heads with a stock bolt pattern.
S&S Cycle Manifold O-Ring 10 Pack for 1984-Up Harley-Davidson Big Twin and 1986-2003 Sportster
$61.95
Seal S&S intake manifold joints on your 1984-Up Harley-Davidson Big Twin or 1986-2003 Sportster with this S&S Cycle replacement manifold O-ring 10-pack.
S&S Cycle Idler Gear Shaft for 1936-1969 Harley-Davidson Big Twin Engines
$29.95
Restore smooth, quiet gear drive operation to your 1936-1969 Harley-Davidson Big Twin with this precision S&S Cycle idler gear shaft, cross-referencing OEM 25791-36.
S&S Cycle Fast Idle Pick-Up Tube 0.125 x 2.350 Brass Super E and G Carburetors
$10.95
Restore reliable cold-start enrichment in your S&S Super E or G carburetor with this direct-replacement fast idle pick-up tube, engineered to factory dimensions.
S&S Cycle Crankpin Nut for 1941-1984 Harley-Davidson Big Twin and S&S 5-Piece Flywheels
$14.95
Secure the crankpin on 1941-1984 Harley-Davidson Big Twin or 1981-1999 S&S Cycle 5-piece flywheel sets with this precision-spec replacement crankpin nut from S&S Cycle.
S&S Cycle Cam Cover Gasket for 2017-Up Harley-Davidson M8 Models
$21.95
Seal the cam cover on your 2017-Up Harley-Davidson M8 engine with this S&S Cycle replacement cam cover gasket, a direct precision-matched replacement for part 25700370.
S&S Cycle Gearcover Camshaft Bushing for 1973-1992 Harley-Davidson Big Twin
$16.95
Restore the camshaft bore in your 1973-1992 Harley-Davidson Big Twin gear cover with this Authentic S&S Cycle bronze replacement gearcover camshaft bushing, made in the USA.
S&S Cycle Breather Gear Spacer Kit for 1984-1999 Harley-Davidson Big Twin
$49.95
Set breather gear end play correctly on your 1984-1999 Harley-Davidson Big Twin with this S&S Cycle spacer kit, including eight graduated shims from .100 to .170 inch.
S&S Cycle Intake Air Temperature Sensor Kit
$109.95
Restore accurate intake air temperature input to your fuel injection system with this S&S Cycle IAT sensor kit, including all mounting hardware. OEM reference 27270-95.
S&S Cycle Cam Bearing Retention Plate for 1999-2006 Harley-Davidson Big Twin
$13.95
Upgrade cam bearing retention on your 1999-2006 Harley-Davidson Big Twin or S&S T-Series engine with this heavy-duty S&S Cycle retention plate for 1999-2006 style cam plates.
S&S Cycle Oil Pump Idler Shaft for 1936-1999 Harley-Davidson Big Twin
$15.95
Restore oil pump drive function on your 1936-1999 Harley-Davidson Big Twin with this S&S Cycle replacement oil pump idler shaft, replacing OEM 26327-68. Sold individually.
S&S Cycle Oil Pump Check Valve Spring 10-Pack for 1936-1999 Harley-Davidson Big Twin
$9.95
Keep your Big Twin oil system properly sealed with fresh check valve springs from S&S Cycle, maintaining consistent oil pressure across 1936-1999 Harley-Davidson Big Twin applications.
S&S Cycle Main Jet Tool for S&S Carburetors
$27.95
Install and remove #72 series main jets cleanly in any S&S carburetor with this purpose-built S&S Cycle main jet tool, made in the USA to prevent jet and bore damage.
S&S Cycle Fuel Inlet Seat 0.160 Inch for Super E and G Carburetors
$18.95
Restore precise float needle seating on your S&S Super E or G carburetor with this 0.160-inch S&S Cycle fuel inlet seat, manufactured in the USA to correct OEM dimensions.
S&S Cycle Enrichment Device for Super E and G Carburetors
$44.95
Restore reliable cold-start enrichment on your S&S Super E or G carburetor with this genuine USA-made direct-fit replacement enrichment device from S&S Cycle.
S&S Cycle Wristpin Bushing for 1941-1999 Harley-Davidson Big Twin
$11.95
Restore the wristpin bore on your 1941-1999 Harley-Davidson Big Twin with this S&S Cycle bronze wristpin bushing, replacing OEM 24334-36. Sold individually.

Showing 193–216 of 276 resultsSorted by popularity