S&S Cycle - Page 6 Of 12 - Twisted Choppers

Showing 121–144 of 276 resultsSorted by popularity

S&S Cycle Mid-Mount Brake Pedal for 2018-Up Harley-Davidson Softail with OEM Mid Controls
$349.95
An S&S billet brake pedal for 2018-Up Softail builds with OEM mid mount controls, providing S&S exhaust clearance and a precise feel in a black anodized finish.
S&S Cycle High-Performance Hydraulic Tappets for 1984-1999 Harley-Davidson Big Twin and Sportster
$381.95
These S&S hydraulic tappets are individually hand-fit and pressure-tested at the factory for reliable valve control; kit includes HL2T conversion hardware for Evo-era builds.
S&S Cycle Hydraulic Tappets with HL2T Kit for 1986-1990 Harley-Davidson Sportster XL
$409.95
Hydraulic tappet and HL2T geometry correction kit for 1986-1990 Harley-Davidson Sportster XL; corrects pushrod travel limitations for high-lift cam compatibility. Requires adjustable pushrods, sold separately.
S&S Cycle VFI Closed Loop Sensor Kit for 1995.5-2001 Harley-Davidson Big Twin

Adds closed-loop oxygen sensor feedback to S&S Magneti Marelli VFI-equipped 1995.5-2001 Harley-Davidson Big Twins for adaptive fuel correction; for use with S&S VFI module 559-0001 only.
S&S Cycle Blue Anodized Camplate for 2017-2020 Harley-Davidson Milwaukee-Eight
$406.95
Precision-forged aluminum camplate in blue anodized finish for 2017-2020 Harley-Davidson Milwaukee-Eight Touring and Softail; features removable passage plugs for oil routing flexibility in cam chest builds.
S&S Cycle Standard Hydraulic Tappet Assembly for 1991-1999 Harley-Davidson Sportster and Buell
$226.95
Standard-specification hydraulic roller tappets for 1991-1999 Harley-Davidson Sportster XL and 1994-1999 Buell XL-engine models; set of four for complete valve train service and quiet lash-free operation.
S&S Cycle Right Passenger Peg Relocation Kit for 2018-Up Harley-Davidson Fat Bob
$81.95
Relocates the right-side passenger peg on 2018-Up Harley-Davidson Fat Bob models to clear the S&S Grand National 2-into-2 exhaust pipe routing without sacrificing passenger peg function.
S&S Cycle Solid Lifter Conversion Kit for 1966-1984 Harley-Davidson Shovelhead Big Twin
$175.95
Converts 1966-1984 Harley-Davidson Shovelhead Big Twin from hydraulic to solid lifters on stock cylinders; includes four non-adjustable pushrods and four adjustable solid lifter adapters.
S&S Cycle Precision Hydraulic Tappets for 1999-Up Harley-Davidson Twin Cam and Sportster XL
$279.95
Hand-assembled hydraulic roller tappets for 2017-Up M8, 1999-2017 Twin Cam, and 2000-Up Sportster XL; set of four with 0.842-inch OD and adjusting screw for precise lifter height setup.
S&S Cycle Motor Sprocket Shaft Assembly for 1936-1951 Harley-Davidson Big Twin
$183.95
Complete tapered motor sprocket shaft assembly for 1936-1951 Harley-Davidson Big Twin, including shaft, nut, and keys; compatible with S&S E or stock flywheel assemblies.
S&S Cycle High-Lift Valve Spring Kit for 1948-1984 Harley-Davidson Big Twin
$248.95
A complete double spring upgrade for 1948-1984 Harley-Davidson Panhead and Shovelhead engines; supports up to .550-inch valve lift and includes outer springs, inner springs, and top retainer collars.
S&S Cycle Manifold Conversion Kit for 1984-1999 Harley-Davidson Evolution Big Twin
$254.95
Rigid aluminum manifold conversion kit for 1984-1999 80-inch Harley-Davidson Evolution Big Twin replaces the stock rubber compliance manifold and eliminates flex-related intake leaks.
S&S Cycle High Flow Replacement Air Filter for Royal Enfield 650 Twin
$79.95
Washable cotton gauze high-flow air filter for 2019-2023 Royal Enfield Continental GT 650 EFI and Interceptor 650 EFI; direct stock airbox fit with 12% more airflow than stock.
S&S Cycle High Flow Air Filter for 2020-2022 Indian Challenger
$87.95
4-ply washable cotton gauze replacement air filter for 2020-2022 Indian Challenger, Challenger Dark Horse, and Challenger Limited; 20% more airflow than stock. CARB EO# D-355-43.
S&S Cycle Billet Fuel Rail Kit for 2020-Up Kawasaki KRX 1000
$184.95
Billet aluminum fuel rail for 2020-Up Kawasaki Teryx KRX 1000 with center inlet for even cylinder distribution and an included pulsation dampener to reduce fuel pressure fluctuations under load.
S&S Cycle Thread Reducer 1/2-13 to 5/16-18 for S&S Carburetor Installations
$11.95
Machined thread reducer converts 1/2-13 motor case threads to 5/16-18 for S&S carburetor support bracket installations. Required on 1992 motors; two per motor. Replaces OEM 29304-92.
S&S Cycle Manifold Conversion Kit for 1986-2003 Harley-Davidson Sportster
$254.95
Rigid aluminum manifold conversion kit replaces the stock rubber compliance manifold on 1986-2003 Harley-Davidson Sportster XL models, eliminating flex-related intake leaks and improving sealing.
S&S Cycle Adjustable Chromoly Pushrod Set for 1966-1984 Harley-Davidson Big Twin
$215.95
Adjustable chromoly pushrod set for 1966-1984 Harley-Davidson Shovelhead Big Twin engines with stock hydraulic tappets; includes adjusting screw and locknut for precise lifter pre-load setup.
S&S Cycle High-Flow Air Filter and Adapter Kit for Super E and G Carburetors
$81.95
High-flow filter and spacer kit for S&S Teardrop air cleaners on Super E and G carburetors; 1-inch taller element with 37% more airflow. Includes all spacers and hardware for installation.
S&S Cycle Replacement High-Flow Air Filter for Super E and G Carburetors
$45.95
Washable cotton gauze high-flow replacement filter provides 37% more airflow than the standard Super E and G filter; pre-oiled and ready to install. Not for Super B/D carbs or Buell kits.
S&S Cycle Adjustable Cam Sprocket for 2014-Up Polaris RZR XP and XP Turbo Models
$189.95
Adjustable cam sprocket providing plus-or-minus 10 degrees of cam timing adjustment for 2014-Up Polaris RZR XP, XP Turbo, and Turbo R models to optimize peak torque and power delivery.
S&S Cycle T-Style O-Ring Intake Manifold for 1955-1965 Harley-Davidson Panhead Big Twin
$122.95
T-style O-ring intake manifold for 1955-1965 Harley-Davidson Panhead Big Twin engines with stock 5.330-inch cylinder length, providing correct carburetor alignment and a reliable seal.
S&S Cycle Teardrop Air Cleaner Backplate 1999-2006 Big Twin and 1991-2003 Sportster XL
$99.99
Replacement backplate for S&S Teardrop air cleaners on Super E and G carburetors, fitting 1999-2006 Twin Cam Big Twin and 1991-2003 Sportster XL models with all necessary hardware included.
S&S Cycle Air Horn Conversion Kit 2.5 Inch for S&S Super E and G Carburetors
$183.95
Machined alloy 2.5-inch air horn kit for S&S Super E and G carburetors, including mounting hardware and carb support bracket. Intended for racing and performance use, not daily street riding.

Showing 121–144 of 276 resultsSorted by popularity