S&S Cycle - Page 11 Of 12 - Twisted Choppers

Showing 241–264 of 276 resultsSorted by popularity

S&S Cycle Ejector Nozzle Tube for Super E and Super G Carburetors
$14.95
Genuine S&S Cycle ejector nozzle tube for Super E and G carburetors - direct OEM replacement that restores correct fuel metering and atomization in the venturi bore.
S&S Cycle Rocker Box Center O-Ring for S&S Die-Cast Rocker Boxes 1984-2017
$19.95
Genuine S&S Cycle rocker box center O-ring for S&S die-cast rocker boxes - sold individually, one per rocker box, fits V-Series (1984-1999) and T-Series (1999-2017).
S&S Cycle Permeation Compliant Fuel Inlet Seat for Super E and G Carburetors
$40.95
Genuine S&S Cycle EPA permeation-compliant fuel inlet seat for Super E and G carburetors - meets permeation requirements at the carburetor fuel inlet for street use.
S&S Cycle Float Pin for Super E and Super G Carburetors 5-Pack
$12.95
Genuine S&S Cycle wire-type float pivot pin for Super E and G carburetors - 5-pack of OEM-spec replacement pins that hold the float in correct position in the bowl.
S&S Cycle Bowl Gasket for Super E and Super G Carburetors
$8.95
Genuine S&S Cycle float bowl gasket for Super E and G carburetors - OEM-spec replacement that creates a fuel-tight seal at the bowl-to-carburetor body interface.
S&S Cycle Check Ball for Super E and Super G Carburetors 10-Pack
$10.95
Genuine S&S Cycle accelerator pump check balls for Super E and G carburetors - 10-pack of OEM-spec replacement balls for correct one-way pump flow control.
S&S Cycle Accelerator Pump Cap Assembly for Super E and Super G Carburetors
$40.95
Genuine S&S Cycle accelerator pump cap assembly for Super E and G carburetors - creates the sealed pump chamber for correct diaphragm actuation and metered fuel delivery.
S&S Cycle HVHP Oil Pump Master Rebuild Kit for 1992-1999 Harley-Davidson Big Twin
$39.95
Complete S&S Cycle HVHP oil pump master rebuild kit for 1992-1999 Big Twin - every consumable component including gaskets, seal, springs, check ball, and O-rings.
S&S Cycle 12 Inch Fuel Line Insulator USA and TUV Approved
$40.95
S&S Cycle 12-inch fuel line insulator certified for USA and TUV markets - provides thermal protection for fuel lines routed near hot exhaust on big twin builds.
S&S Cycle 9 Inch VOES Oil Return Hose
$8.95
Authentic S&S Cycle 9-inch VOES oil return hose - correct length for routing oil return from the VOES vacuum fitting on Harley-Davidson big twin crankcase systems.
S&S Cycle Black Nylon Tuned Induction Air Filter Pre-Filter Cover 2-Pack
$114.95
S&S Cycle black nylon pre-filter cover for tapered tuned induction filter elements - 2-pack protects the pleated filter from grit and water while maintaining free airflow.
S&S Cycle TC3 Oil Pump Debris Screen for 1999-2017 Harley-Davidson Twin Cam
$15.95
Replace the TC3 oil pump debris screen to protect precision pump components and maintain clean, consistent oil flow to your 1999-2017 Twin Cam Big Twin engine.
S&S Cycle TC3 Oil Pump Return Plug for 1999-2017 Harley-Davidson Twin Cam
$11.95
Replace the TC3 oil pump return plug to restore a leak-free return circuit, maintain full oil pressure, and protect your Twin Cam Big Twin engine on every ride.
S&S Cycle Oil Pump Check Valve Replacement Ball 0.375 Inch Stainless Steel
$4.95
S&S Cycle 0.375-inch stainless steel oil pump check valve ball - restores one-way flow control and oil priming function in S&S and OEM big twin oil pump assemblies.
S&S Cycle Fast Idle Plunger for Super E and Super G Carburetors
$19.95
Genuine S&S Cycle fast idle plunger for Super E and G carburetors - direct OEM replacement that restores correct cold-start enrichment function and warm-up behavior.
S&S Cycle Float Needle for Wire Type Float Super B E and G Carburetors
$19.95
Genuine S&S Cycle float needle for wire-type float assemblies in Super B, E, and G carburetors - OEM-spec replacement for a precise, fuel-tight inlet seal.
S&S Cycle Pump Pushrod for Super E and Super G Carburetors 5-Pack
$40.95
Genuine S&S Cycle accelerator pump pushrod for Super E and G carburetors - 5-pack of OEM-spec replacements for direct diaphragm actuation and consistent fuel delivery.
S&S Cycle Accelerator Pump Diaphragm for Super E and Super G Carburetors
$21.95
Genuine S&S Cycle accelerator pump diaphragm for Super E and G carburetors - OEM-spec replacement that restores correct pump sealing and fuel delivery on acceleration.
S&S Cycle HVHP Oil Pump Gasket Kit for 1992-1999 Harley-Davidson Big Twin
$15.95
Genuine S&S Cycle rebuild gasket for HVHP billet oil pumps on 1992-1999 Big Twin - sold individually for a correct, oil-tight seal during oil pump rebuild.
S&S Cycle Racing Float Needle Super E and G Carburetors
$81.95
Restore precise fuel metering in your S&S Super E or G carburetor with this racing float needle, eliminating flooding and hesitation for consistent power delivery.
S&S Cycle TC3 Oil Pump O-Ring Kit for 1999-2017 Harley-Davidson Twin Cam
$11.95
Restore leak-free operation in the S&S Cycle TC3 Oil Pump with this complete O-ring kit, keeping your Twin Cam Big Twin's lubrication system fully sealed and pressurized.
S&S Cycle Idle Mixture Screw O-Ring 10-Pack for Super E and Super G Carburetors
$12.95
Genuine S&S Cycle O-ring for the idle mixture screw groove on Super E and G carburetors - 10-pack of 1mm x 3mm x 5mm seals for precise idle circuit control.
S&S Cycle 10-24 x 2-3/8 Inch Zinc-Plated Slotted Flat Head Screw with Lock Washer
$6.95
Genuine S&S Cycle 10-24 x 2-3/8 inch zinc-plated slotted flat head screw with lock washer - OEM-spec assembly fastener for S&S carburetor and fuel system builds.
S&S Cycle Wire Type Float for Super B E and G Carburetors
$28.95
Genuine S&S Cycle wire-type float for Super B, E, and G carburetors - direct OEM replacement that restores correct float height and fuel level in the bowl.

Showing 241–264 of 276 resultsSorted by popularity