S&S Cycle - Page 2 Of 12 - Twisted Choppers

Showing 25–48 of 278 resultsSorted by popularity

S&S Cycle T143 Forged Piston Kit
$799.95
The S&S Cycle T143 forged piston kit, available in standard bore or +.020 inch oversize, sized for S&S T143 engine rebuilds with new or bored-out cylinders.
S&S Cycle MK136B Black Edition Engine Fits Harley-Davidson Oil-Cooled M8 Softail 2018-2024
$12,499.95
A complete 136 cubic-inch S&S Cycle Black Edition Milwaukee-Eight crate engine on Softail-specific MKB-Series crankcases, available in 475G 49-state or 550G race-only camshaft configurations, compatible with Harley-Davidson oil-cooled M8 Softail chassis.
S&S Cycle 80W-140 High Performance Full-Synthetic Gear Oil Fits Harley-Davidson
$14.95
This full-synthetic gear oil is formulated for use in Harley-Davidson Big Twin transmissions and gearboxes. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Timken Sprocket Shaft Bearings Fits Harley-Davidson Big Twin Evolution 1984-2017
$99.95
This Timken bearing fits 1984-2017 Evolution Big Twin as an OEM replacement and 2000-2017 Twin Cam Big Twin as a Timken conversion. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Replacement Air Filter – Super E and G
$35.95
A single S&S Cycle replacement air filter for S&S Teardrop air cleaner kits used with S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle.
S&S Cycle Billet Head Breather Fits Harley-Davidson Milwaukee-Eight M8 2017-Up
$299.95
This kit fits Harley-Davidson 2017-Up Milwaukee-Eight models as a direct replacement for stock plastic head breathers. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Replacement Air Stinger Air Filter
$59.95
This filter is a direct replacement for use in all S&S Air Stinger Stealth Air Cleaner assemblies. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle CVO Cam Phaser Tool Fits Harley-Davidson Milwaukee-Eight M8 2023-Up
$74.95
This tool is required for cam chest service on 2023-Up Milwaukee-Eight CVO models with variable valve timing. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Compression Release Hole Plug
$24.95
The S&S Cycle compression release hole plug, sized to seal the compression-release port on an S&S performance cylinder head; not for OEM Harley-Davidson cylinder heads.
S&S Cycle 24-Tooth Oil Pump Drive Gear Fits Harley-Davidson Big Twin 1973-1999
Rated 5.00 out of 5
$50.95
A single 24-tooth S&S Cycle oil pump drive gear shipped as ONE gear per order; pair with S&S 33-4232 (sold separately) or an OEM equivalent to complete the oil pump drive set on a 1973-1999 Harley-Davidson Big Twin engine.
S&S Cycle Supply/Return Line Elbow Fits Harley-Davidson Big Twin 1984-1999
$61.95
This five-pack of supply and return elbows is designed to fit S&S Cycle HVHP Oil Pump installations on the following Harley-Davidson models. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Exhaust Dealer Service Kit
$50.95
This tamperproof screw seals the mixture adjustment port on S&S Super E and Super G carburetors following authorized dealer service. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Tappet Cuffs Lifter Guide Fits Harley-Davidson Milwaukee-Eight M8 2017-Up
$84.95
These tappet cuffs fit Harley-Davidson M8 (Milwaukee-Eight) engines from 2017 to present. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Left Main Bearing Seal Fits Harley-Davidson Sportster 1991-2003
$24.95
This sprocket shaft oil seal fits the following Harley-Davidson Sportster XL models. Made in the U.S.A. by S&S Cycle for service-replacement use. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Pump Pushrod for Super E and G Carburetors
$11.95
This is a replacement part for S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle for service-replacement use. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Fitting
$15.95
A single S&S Cycle 45-degree elbow fitting at 1/4-18 NPTF x .375 inch, used on the Big Twin crankcase flywheel cavity breather line and other oil and breather line connections.
S&S Cycle Enrichment Lever
$14.95
This long enrichment lever fits S&S Super E and Super G carburetors - not compatible with Buell applications. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Carburetor Needle
$19.95
This float needle fits the wire-type float assembly on S&S Super B, Super E, and Super G carburetors. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle T143 4.425 Inch Bore Complete Engine Gasket Kit Fits S&S T143 Engines
$325.95
A complete S&S Cycle T143 engine gasket kit covering every sealing surface on the S&S T143 4.425 inch bore engine, sized specifically for T143 builds and rebuilds.
S&S Cycle MK136 Black Edition Engine Fits Harley-Davidson Oil-Cooled M8 Touring 2017-2023
$11,999.95
A complete 136 cubic-inch S&S Cycle Black Edition Milwaukee-Eight crate engine on MK-Series Touring crankcases, available in 475G 49-state or 550G race-only camshaft configurations, compatible with Harley-Davidson oil-cooled M8 Touring chassis.
S&S Cycle MK-Series Engine Case Fits Harley-Davidson
$2,499.95
This engine case fits the following Harley-Davidson Milwaukee-Eight Touring models. Made in the U.S.A. by S&S Cycle for service-replacement use. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle 128 Power Package Fits Harley-Davidson Oil-Cooled M8 114 and 117 2017-2022
Price range: $3,265.95 through $3,460.95
A complete S&S Cycle 128 cubic-inch big-bore Power Package kit for the oil-cooled M8 114 or 117 engine in three finishes and chain or gear drive configurations, compatible with 2017-2022 Harley-Davidson oil-cooled Milwaukee-Eight Touring and Softail chassis.
S&S Cycle V80 Engine Fits Harley-Davidson Evolution Big Twin 1984-1999
Price range: $6,799.95 through $8,599.95
A complete S&S Cycle V80 carbureted 80 cubic-inch Evolution Big Twin crate engine available in Natural or Wrinkle Black, compatible with 1984-1999 Harley-Davidson Evolution Big Twin chassis (Softail, FXR, Dyna, Touring) and custom frames.
S&S Cycle KN93 Alt/Gen Knucklehead Engine Fits Harley-Davidson Big Twin 1970-1999
$13,449.95
A complete 93 cubic-inch S&S KN93 knucklehead-style crate engine on alt/gen-style crankcases with solid lifters, compatible with 1970-1999 Harley-Davidson Big Twin custom chassis using the 1970-1999 primary-case bolt pattern.

Showing 25–48 of 278 resultsSorted by popularity