S&S Cycle Engines & Performance Parts

Showing 217–240 of 278 resultsSorted by popularity

S&S Cycle Breather Gear Spacing Shim Kit Fits Harley-Davidson Big Twin 1984-1999
$49.95
This kit is designed to fit adjusting breather gear end play on 1984-1999 Harley-Davidson Big Twin engines. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Air Temperature Sensor
$109.95
A genuine S&S Cycle air temperature sensor for service-replacement use on the host S&S Cycle application; This product does not require model-specific selection. Made in the U.S.A. by S&S Cycle.
S&S Cycle Cam Bearing Retention Plate Fits Harley-Davidson Big Twin 1999-2006
$13.95
This retention plate is designed to fit 1999-2006 style cam plates used in 1999-2006 Big Twin engines and S&S T-Series engines with compatible cam plates.
S&S Cycle Oil Pump Idler Shaft Fits Harley-Davidson Big Twin 1936-1999
$15.95
A genuine S&S Cycle oil pump idler shaft for service-replacement use on the host S&S Cycle application; This shaft fits Harley-Davidson Big Twin engines from 1936 through 1999. Made in the U.S.A. by S&S Cycle.
S&S Cycle Main Jet Tool
$27.95
A genuine S&S Cycle main jet tool for service-replacement use on the host S&S Cycle application; This product does not require model-specific selection. Made in the U.S.A. by S&S Cycle.
S&S Cycle Fuel Inlet Seat
$18.95
A genuine S&S Cycle fuel inlet seat for service-replacement use on the host S&S Cycle application; This is a replacement part for S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle.
S&S Cycle Enrichment Device
$44.95
A single S&S Cycle replacement enrichment device for the cold-start enrichment circuit on S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle.
S&S Cycle Wrist Pin Bushing Fits Harley-Davidson Big Twin 1941-1999
$11.95
This bushing fits Harley-Davidson Big Twin engines from 1941 through 1999, and S&S Cycle V96, V107, and V113 engines. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Valve Spring Shim
$7.95
This shim is designed to fit use with .720-inch and .660-inch lift valve springs in S&S B3 cylinder heads. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Valve Guide Seals Fits Harley-Davidson Big Twin Sportster 1984-2004
$23.95
These seals fit Harley-Davidson Big Twin engines from 1984-2004 and Sportster engines from 1986-2003. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Tappet Guide Gaskets Fits Harley-Davidson Big Twin 1948-1999
$10.95
A genuine S&S Cycle tappet guide gaskets for service-replacement use on the host S&S Cycle application; These gaskets fit Harley-Davidson Big Twin engines from 1948 through 1999. Made in the U.S.A. by S&S Cycle.
S&S Cycle Tappet Block/Oil Pump Alignment Tool
$41.95
Universal-fit S&S Cycle tappet block to oil pump alignment service tool, made in the U.S.A. by S&S Cycle. Required during tappet block and oil pump fitment alignment work.
S&S Cycle Swivel Head Bowl Vent Screw
$6.95
A genuine S&S Cycle swivel head bowl vent screw for service-replacement use on the host S&S Cycle application; This product does not require model-specific selection. Made in the U.S.A. by S&S Cycle.
S&S Cycle Slotted Pan Head Screws
$9.95
A 10-pack of S&S Cycle 10-24 x 1/4 inch slotted pan head screws for general-purpose service and assembly on S&S Super-series carburetors and related hardware.
S&S Cycle Slotted Flat Head Screws
$13.95
A 10-pack of S&S Cycle 8-32 x 5/8 inch slotted flat head service screws that cross-reference OEM 59904-80, general-purpose hardware for S&S carburetor and engine-cover service.
S&S Cycle Shift Lever Adjustment Screw Fits Harley-Davidson
$27.95
A single S&S Cycle replacement shift lever adjustment screw, sized Compatible with Harley-Davidson Big Twin 5-speed transmission shift lever applications.
S&S Cycle Rocker Box Washers
$15.95
A genuine S&S Cycle rocker box washers for service-replacement use on the host S&S Cycle application; This product does not require model-specific selection. Made in the U.S.A. by S&S Cycle.
S&S Cycle Rocker Box Washer
$6.95
A genuine S&S Cycle rocker box washer for service-replacement use on the host S&S Cycle application; This product does not require model-specific selection. Made in the U.S.A. by S&S Cycle.
S&S Cycle Rocker Arm Bushing
$14.95
This stepped bushing is designed to fit use with S&S Cycle Standard and Roller Rocker Arms and is not compatible with other designs. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Replacement CV Adapter Backplate Gasket
$8.95
A single S&S Cycle 0.0625-inch CV adapter backplate gasket compatible with S&S Super E, Super G, and CV adapter backplate interfaces. Made in the U.S.A. by S&S Cycle.
S&S Cycle Pushrod Cover O-Ring Kit Fits Harley-Davidson Big Twin Sportster 1984-2003
$12.95
This kit fits Harley-Davidson Big Twin engines from 1984-2003 and Sportster engines from 1986-2003. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Pump Actuator Arm
$8.95
This pump actuator arm is a direct replacement for the accelerator pump actuator on S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Plunger Nut for Super E and Super G Carburetors 5-Pack
$19.95
This 5-pack of plunger nuts secures the fast idle plunger in the body of S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Pinion Shaft Gear Nut Fits Harley-Davidson Big Twin 1954-1999
$53.95
This pinion gear nut fits Harley-Davidson 1954-1999 Big Twin OEM flywheels and 1990-1999 engines with S&S flywheels. Made in the U.S.A. by S&S Cycle for service-replacement use.

Showing 217–240 of 278 resultsSorted by popularity