Sheetmetal

Showing 97–120 of 135 resultsSorted by popularity

Mid-USA Mustang Narrow Gas Tank 2.2 Gallon for Custom Motorcycle Builds
Rated 5.00 out of 5
Price range: $154.95 through $189.95
Mid-USA V-Factor 2.2 gallon Mustang narrow raw steel gas tank for custom builds - front and rear tab mounts; available with center screw-in cap (1982-Up) or right bayonet cap (pre-1982).
Twisted Choppers Speed Holes Rear Custom Fender Race-Inspired Steel Choppers
Price range: $379.95 through $699.95
Hand-spun 13-gauge U.S. steel Speed Holes Rear Fender for custom choppers and bobbers. Available in 12 widths to match tire sizes from 130mm to 330mm. Ships raw for custom mounting and finish.
Twisted Choppers Weld-On Mounting Tab .875 x 1.81 Inch
$4.95
Weld-on steel mounting tab .875 inch wide by 1.81 inches long with a 5/16-inch hole; 1/4-inch steel construction for custom frame and fabrication use, made in the USA.
Twisted Choppers Hand Tubing Bender 180 Degree 1/4 – 5/16 – 3/8 Inch OD Tube
$11.95
Cast aluminum hand tubing bender for 1/4, 5/16, and 3/8-inch OD tubing; 0-180 degree range, lever action, 15/16-inch centerline radius. Works on aluminum, copper, and steel. Made in the USA.
Mid-USA 2.2 Gallon Legacy Gas Tank for 2004-2022 Harley-Davidson Sportster
$247.95
Mid-USA V-Factor 2.2 gallon Legacy raw steel replacement tank for Harley-Davidson Sportster 2004-2022 - new-style mounts, 18 inch length, available for carb and EFI models.
Twisted Choppers Machine Gun Rear Custom Fender Perforated Steel Choppers
Price range: $379.95 through $699.95
Hand-spun 13-gauge U.S. steel Machine Gun Rear Fender for custom choppers and bobbers. Available in 12 widths to match tire sizes from 130mm to 330mm. Ships raw for custom mounting and finish.
V-Twin Mfg King 3.2 Gallon EFI Gas Tank for 2007-2022 Harley-Davidson Sportster
$285.91
King-style 3.2 gallon EFI gas tank for 2007-2022 Harley-Davidson Sportster - updated flowing profile, bolts to OEM mounts, uses OEM fuel pump, ships raw.
Mid-USA 2.25 Gallon Peanut Raw Steel Gas Tank for Harley-Davidson Sportster 1982-1994
$195.45
Mid-USA V-Factor 2.25 gallon peanut raw steel tank fits Harley-Davidson Sportster 1982-1994 with a 22mm external thread petcock bung for early cam style or bayonet gas caps.
Twisted Choppers Solo Seat Spring Standoff Slugs 1-3/8 x 1 Inch 1-1/4 Inch Cope USA Made Pair
Sale! $19.95$9.9550% OFF
USA-made mild steel solo seat spring standoff slugs coped for 1-1/4-inch frame tubing; 1-3/8-inch length, 1-inch diameter; offsets springs from frame tube; sold as a pair.
V-Twin Mfg Chopper Axed 2.2 Gallon Gas Tank with Cap Custom Motorcycle
Rated 5.00 out of 5
$179.69
Axed profile 2.2 gallon chopper gas tank with dual petcock locations, bayonet cap, and undrilled front and rear mount tabs - ships raw for custom painting.
Twisted Choppers Inverted Pill Oil Tank
$239.95
An inverted pill oil tank with internally domed ends for bobber and hardtail builds - mild steel construction, pressure tested, and made in the USA by Twisted Choppers.
Twisted Choppers Nickel-Copper Oil Line 3/8-Inch OD 10-Foot Hardline Tubing
$38.95
3/8-inch OD nickel-copper oil line tubing with .030-inch wall, 10-foot roll, designed for Twisted Choppers hardline oil line kits and custom motorcycle builds.
Twisted Choppers Nickel-Copper Hard Oil Line Kit Custom Motorcycles Choppers
$199.95
Complete nickel-copper hardline oil line kit with 10-foot 3/8-inch OD tubing, bender, cutter, and 12 Vibra-Lok brass fittings; no flaring needed. Made in the USA.
S&S Cycle Oil Pump Compression Return Fitting Fits Harley-Davidson Big Twin 1984-1999
$33.95
This compression return fitting is designed to fit S&S Cycle HVHP Oil Pump installations on the following Harley-Davidson models. Made in the U.S.A. by S&S Cycle for service-replacement use.
Parker 90 Degree Union Elbow Oil Line Fitting Brass 1/8 NPT Female Both Ends
$5.95
Parker 90-degree union elbow fitting in brass, 1/8-27 NPT female threads on both ends, for connecting two 1/8 NPT male ports at a right angle on motorcycle oil and fuel systems.
Twisted Choppers Hardtail Sportster Lower Fender Mount
$19.95
Lower fender mount for Twisted Choppers Sportster hardtail kits, machined from 1/4-inch steel with 2-inch hole spacing; available in Stock, 200mm, and 250mm sizes.
Twisted Choppers Weld-On Frame Fender Mount
$24.95
Weld-on frame mount accepting Twisted Choppers upper hardtail fender mounting plates; 4-inch wide 1/4-inch steel with 3/8-24 threaded holes at 1-1/2-inch spacing.
V-Twin Mfg Hi-Tunnel 2.4 Gallon Gas Tank for 1952-1970 Harley-Davidson Sportster
$159.99
Hi-tunnel 2.4 gallon gas tank for 1952-1970 Harley-Davidson Sportster XLCH and K models - uses stock mounts, right side 3/8 inch NPT petcock, ships unprimed.
Twisted Choppers Cutaway Rear Custom Fender Reverse Scallop Steel Choppers
Price range: $329.95 through $699.95
Hand-spun 13-gauge U.S. steel Cutaway Rear Fender for custom choppers and bobbers. Available in 12 widths to match tire sizes from 130mm to 330mm. Ships raw for custom mounting and finish.
Twisted Choppers Radius Custom Front Fender 23-Inch Wheel Raw Steel
$249.95
Radius-style raw steel front fender for 23-inch wheels; 5.75-inch wide, 30.75-inch diameter, 13GA CRS. Hand-spun and TIG-welded. Requires paint prep. Made in the USA.
Twisted Choppers Builders Custom Front Fender 23-Inch Wheel Raw Steel
$249.95
Builders-style raw steel front fender for 23-inch wheels; 5.75-inch wide, 30.75-inch diameter, 13GA CRS. Hand-spun and TIG-welded. Requires paint prep. Made in the USA.
Twisted Choppers Rear Fender Kit for 2004-2022 Harley-Davidson XL Sportster
Price range: $459.95 through $499.95
A complete rear fender and seat kit replacing the factory Sportster fender - available with or without ECM mount for all 2004-2022 Harley-Davidson XL Sportster models, made in the USA.
Twisted Choppers Sportster Top Motor Mount Switch Plate 12-Gauge Steel USA Made
$19.95
A USA-made 12-gauge steel switch plate built for Sportster top motor mount configurations on custom Harley-Davidson motorcycles - uncoated and ready to finish.
Twisted Choppers 4 Point Mount 5 Inch Round Oil Tank 5/16-18 Thread USA Made
Rated 5.00 out of 5
$39.95
Weld-in four-point mount fits any 5-inch diameter round oil tank using standard rubber grommets; 5/16-18 thread with pre-welded nuts; clearance for center-mounted filler cap; USA-made.

Showing 97–120 of 135 resultsSorted by popularity