Twisted Choppers Nickel-Copper Hard Oil Line Kit for Custom Motorcycles
Hard oil lines give a custom build a clean, mechanical look. This kit is for the builder who wants to make those lines by hand: The tubing is cut to length, bent to shape and joined at each port, one line at a time, so the oil plumbing follows the path you lay out and looks as deliberate as the rest of the bike.
Key Features
- Tubing bender and close-quarters tubing cutter are included, so the tubing is cut and bent without buying either tool separately
- Vibra-Lok fittings seal with a rubber band around the tube, so no flaring is required
- Fittings are made for high-vibration use, where metal-on-metal compression fittings commonly leak
Technical Specifications
- Tubing
- 3/8 inch OD nickel-copper, 10 feet
- Straight Fittings
- 6 Vibra-Lok, brass, 1/8-27 NPT
- 90-Degree Fittings
- 6 adapter fittings, brass, 1/8-27 NPT
- Made In
- USA
Fitment Notes
- Compatible with Harley-Davidson and custom motorcycles that use 1/8-27 NPT oil line ports.
- The fittings do not fit metric or other non-NPT threads.
- Additional tubing and fittings are sold separately for longer runs.
- Check the port thread on your oil tank and engine against the size in the Fitment tab before ordering.
- This aftermarket part is not manufactured, sponsored, or endorsed by the motorcycle manufacturer.
Reviews
There are no reviews yet