Sheetmetal

Showing 49–72 of 135 resultsSorted by popularity

Custom Chrome 5 Bullet 44 Mag Pop Up Gas Cap WCC Villain Chopper Gas Tank
Rated 5.00 out of 5
$119.95
An aluminum vented pop-up gas cap with an embedded brass 44 Mag detail, designed exclusively as a direct replacement for the WCC Villain replica chopper gas tank.
Drag Specialties Weld-In Gas Cap Tank Bung for 1984-1996 Harley-Davidson
Rated 5.00 out of 5
Price range: $11.28 through $13.34
Drag Specialties weld-in gas cap tank bung accepts 1984-to-early-1996 Harley-Davidson style screw-in caps - vented and non-vented thread versions for custom tank builds.
Twisted Choppers Triangular Weld-On Mounting Tab
$4.95
Compact 1/8-inch steel weld-on pivot tab with a 5/16-inch hole, used as the front pivot for spring shock seat pan setups on custom choppers and bobbers.
Mid-USA Solo Seat Springs 3 Inch Barrel Coil Style Pair for Custom Motorcycles
Rated 5.00 out of 5
Price range: $8.95 through $11.95
Mid-USA V-Factor 3 inch barrel coil solo seat springs in special-gauge spring steel - sold in pairs in Chrome, Antique Copper, and Black finishes for custom motorcycle solo seat builds.
Parker 90 Degree Street Elbow Oil Line Fitting Zinc 1/8 NPT x 1/8 NPT
$7.95
Parker 90-degree street elbow fitting in zinc-plated brass, 1/8-27 NPT female inlet to 1/8-27 NPT male outlet, for oil and fuel line 90-degree connections on motorcycles.
Twisted Choppers Sportster Drop Seat Oil Tank for Weld-On Hardtail
Rated 5.00 out of 5
$299.95
Drop seat oil tank for Twisted Choppers Sportster weld-on hardtails; pressure tested, 1/8-27 NPT fittings, backbone tunnel and chain relief. Requires welding. Made in the USA.
Twisted Choppers 3/4 x 7/8 Blind-Hole Threaded Mounting Boss 3/8-16 Thread USA Made
$5.95
USA-made cold-rolled mild steel blind-hole weld-on mounting boss; 3/4 inch diameter x 7/8 inch length with 3/8-16 blind-hole thread; clean threaded anchor for custom builds; sold individually.
Twisted Choppers Drop Seat Hardtail Front Oil Tank Mount 1.625 Inch Tube Weld-On USA Made
Rated 5.00 out of 5
$16.95
Weld-on front oil tank mount for Twisted Choppers dropseat hardtail frames with TC-487 oil tank; fits 1.625-inch tubing with 4.25-inch hole centers; rubber grommets sold separately.
Twisted Choppers Hardtail Oil Tank Mounting Tab Laser Cut Weld-On USA Made
Rated 5.00 out of 5
$6.95
Laser-cut weld-on mounting tab for Twisted Choppers hardtail oil tanks; straight seat frames use 4 per tank, drop seat frames use 1 for rear mount; standard rubber grommets sold separately.
Twisted Choppers 1/2 x 3/4 Thru-Hole Threaded Mounting Boss 5/16-18 Thread USA Made
$4.95
USA-made cold-rolled mild steel thru-hole weld-on mounting boss; 1/2 inch diameter x 3/4 inch length with 5/16-18 thru-hole thread; clean threaded anchor for custom builds; sold individually.
Twisted Choppers Weld-On Battery Box Mounting Plate Custom Chopper Bobber
Rated 5.00 out of 5
$49.95
A weld-on steel mounting plate with three bolt-pattern sets designed to pair with the Twisted Choppers battery box on any custom chopper, bobber, or hardtail frame build.
Twisted Choppers Shock Frame Weld-On Mounting Tabs
Rated 5.00 out of 5
$24.95
Sold as a pair, these 7-gauge steel weld-on tabs with 5/16-inch holes mount a spring shock seat pan to the backbone or seat post on any custom chopper or bobber build.
Twisted Choppers Seat Pan Kit for 2015-2024 Indian Scout
Sale! $229.95$189.9517% OFF
Bolt-on seat pan kit for 2015-2024 Indian Scout providing a lower seat height; no modifications needed, works with factory fender. Will NOT fit 2025-Up. Seat covering not included.
Twisted Choppers Under Trans Oil Tank For Big Twin Frames
Rated 5.00 out of 5
$279.95
Purpose-built for Twisted Choppers Big Twin drop-seat frames, this 3-quart under-trans oil tank keeps oil storage hidden beneath the transmission with a clean, low-profile design.
Custom Chrome Pop Up Fuel Tank Cap with Weld In Bung Stainless Steel
Rated 5.00 out of 5
$109.95
Stainless steel spring-loaded pop-up fuel tank cap with weld-in bung for custom and chopper motorcycle tank builds, offering a flush-mount profile with universal thread fitment and full corrosion resistance.
Twisted Choppers Builders Rear Custom Fender Deep Side Wall Fabrication Steel
Price range: $279.95 through $599.95
Hand-spun 13-gauge U.S. steel Builders Rear Fender for custom choppers and bobbers. Available in 12 widths to match tire sizes from 130mm to 330mm. Ships raw for custom mounting and finish.
V-Twin Mfg King Gas Tank for 1958-2003 Harley-Davidson Sportster
Price range: $155.10 through $267.54
King gas tank 2 inches wider than stock for extra capacity on 1958-2003 Harley-Davidson Sportster XL - ships raw, order petcock and gas cap separately.
Twisted Choppers Copper Oil Line 3/8-Inch OD 10-Foot Hardline Tubing
$35.95
3/8-inch OD copper oil line tubing with .030-inch wall, 10-foot roll, designed for Twisted Choppers hardline oil line kits and custom motorcycle builds.
Twisted Choppers Vault Motorcycle Seat Pan 13-Gauge Hand-Shaped Steel
$29.95
A hand-shaped 13-gauge steel seat pan compatible with hard mount, rubber mount, spring shock, and solo seat setups on Harley-Davidson and custom motorcycles - made in the USA.
Twisted Choppers Stretched Dash Console For 2000-2017 Harley-Davidson Softail
Rated 5.00 out of 5
Price range: $299.95 through $399.95
Stretched dash console for 2000-2017 Harley-Davidson Softail - fits 2000-2015 FXST and 2000-2017 FLST with a 5-inch gauge opening and integrated flip-top ignition cover.
Twisted Choppers Hardtail Sportster Fender Mounting Kit
Rated 5.00 out of 5
$64.95
Complete mounting kit for the Twisted Choppers Sportster hardtail - upper and lower 1/4-inch steel mounts plus all hardware; available in Stock, 200mm, and 250mm.
EMPI Remote Oil Filter Relocation Mount Right Side 3/8 NPT for Harley-Davidson Evo and Twin Cam
Rated 5.00 out of 5
Sale! Price range: $24.95 through $31.9520% OFF
Cast aluminum oil filter relocation mount with right-side 3/8 NPT ports for Harley-Davidson Evo and Twin Cam - accepts HD #1156 and Fram PH8A filters for custom remote filter builds.
Twisted Choppers 3/4 x 3/4 Blind-Hole Threaded Mounting Boss 5/16-18 Thread USA Made
Rated 5.00 out of 5
$5.95
USA-made cold-rolled mild steel blind-hole weld-on mounting boss; 3/4 inch diameter x 3/4 inch length with 5/16-18 blind-hole thread; clean threaded anchor for custom builds; sold individually.
Twisted Choppers Barrel Style Round Motorcycle Oil Tank
$199.95
A horizontal-mount barrel style oil tank for custom frames and early model Harley-Davidson motorcycles, available in top or side fill and built from mild steel.

Showing 49–72 of 135 resultsSorted by popularity