Mid-USA Hardbody Wide Style Generation II Chrome Springer
Mid-USA Hardbody Wide Style Generation II Chrome Springer - Image 2
Mid-USA Hardbody Wide Style Generation II Chrome Springer - Image 3
Mid-USA

Mid-USA Hardbody Wide Style Generation II Chrome Springer

1 review|8 answered questions

Price range: $634.95 through $711.45

-

Free Shipping $99+

Riser Handlebar Adapter

Converts the 4.75″ Bolt Pattern to The Standard Harley 3.5″ Bolt Pattern

None Chrome Riser Adapter +$99.99 Black Riser Adapter +$89.99
Fender Mounts

Clamp-on Fender Mount For Lightweight Fender

None Chrome 1" Springer Fender Mounts 35316 +$109.95 Black 1" Springer Fender Mounts 35317 +$84.95
Usually Ships Within 2 - 4 Business Days
SKU: CHROME-HARDBODY-SPRINGER Brand: Mid-USA

Mid-USA Hardbody Wide Style Generation II Chrome Springer

The Mid-USA Hardbody Wide Style Generation II springer transforms the look and stance of any custom chopper build, delivering the sweeping wide-style silhouette and commanding street presence that define a true head-turner. Built for builders who demand both visual impact and mechanical durability, the Hardbody is the platform that anchors a complete custom build.

Key Features
  • Available in 9 fork lengths from 6 Under to 10 Over stock in 2-inch increments
  • Arrives fully assembled and ready to install
  • Both rear legs threaded for right- or left-side brake caliper mounts
  • One-piece rear legs from rocker to top tree for added structural rigidity
  • Forged rockers with grease zerk fittings for long-term serviceability
  • Forged in-line top bracket without built-in rake
Technical Specifications
  • Steering Stem Diameter: 1″ O.D. (Timken type bearings)
  • Stock Length: 24″ from bottom bearing to axle center (FXST comparable)
  • Length Range: 6 Under to 10 Over stock in 2-inch increments
  • Finish: Chrome
  • Bracket Style: Forged in-line (no built-in rake)
  • Weight (Stock): 46.4 lbs
Fitment Notes
  • Requires 1″ Timken type neck bearings; verify neck bearing compatibility with your frame before ordering
  • Top bracket is forged in-line with no built-in rake; rake is determined entirely by the frame neck angle
  • Both rear legs are threaded for caliper mounts; confirm brake caliper and hub compatibility for your wheel and rotor setup
  • Intended for custom chopper fabrication; not a drop-in replacement for OEM Harley-Davidson springer assemblies
  • SKU 35207 (6 Under) was not found on the current Mid-USA product listing; confirm availability before ordering
  • Fork length is measured relative to stock FXST assembly length; consult your frame manufacturer for the correct length and rake combination
Dimensional Options
Buyers select the fork length relative to stock FXST assembly length; lengths range from 6 Under to 10 Over in 2-inch increments, with Stock matching the standard 24-inch assembly measurement.
Weight N/A
Dimensions N/A
Fork Length

, , , , , , , ,

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

  1. Holly –

    Glad we chose twisted choppers we will be doing more business in the near future.!!!

    (2) (0)
Add a review

Your email address will not be published. Required fields are marked *

Q & A

Ask a question
Will this fit a 2016 heritage softail and can we just buy the brake bracket and use our own caliper? Stephen Dente asked on January 7, 2024

This should fit your model. We do not sell a springer brake bracket by itself. We only sell complete kits.

 Joe Skinner answered on January 8, 2024 store manager
(0) (0)
Add an answer
I have a 2001 883 xlh sportster , it has a 21” front wheel and I’m assuming it has the stock rake , with the front wheel be larger than the stock , will that change the fork length Chris asked on August 29, 2023

It's most likely a 2 under but it's always best to measure to make sure you get the correct size.

 Twisted Choppers answered on August 29, 2023
(0) (0)
Add an answer
Will this fit a 1999 1200 xl custom sportster? Joe H Smith asked on August 28, 2023

Yes, this will fit.

 Twisted Choppers answered on August 28, 2023
(0) (0)
Add an answer
Will this fit my 2006 softail standard? David Adams asked on July 30, 2023

Yes, this will fit your softail.

 Twisted Choppers answered on July 31, 2023
(0) (0)
Add an answer
Will this fit a 2009 Harley nightrain that is stock rake Mark Lemoine asked on July 23, 2023

Yes, this will fit your Softail model.

 Twisted Choppers answered on July 24, 2023
(0) (0)
Add an answer

Related products