Exile Cycles 5 Spoke 11.5 Inch Brake Rotor Fits Harley-Davidson 1984-2017

Exile Cycles 5 Spoke 11.5 Inch Brake Rotor Fits Harley-Davidson 1984-2017

A rotor that shows off the hub instead of hiding it. Exile cut five open spokes into a polished stainless face so a wheel reads as one piece with the Sprocket Brake Kit at the back, or simply so a plain disc is no longer just a plain disc. Ground flat and parallel, it gives the pads an even face at the lever and the pedal, and the sleeve in the box lets one rotor cover both hub generations.

Key Features

• Five open spokes expose the hub and match the Exile Sprocket Brake Kit, so the front and rear of the bike carry the same look
• Ground flat and parallel after machining, so the pads see an even face and the lever or pedal stays smooth
• Polished 410 stainless steel gives a bright face between the spokes of the wheel, so the open design reads as a finished part and not a bare blank
• Press-in sleeve included reduces the 2.215 inch center hole to 1.98 inch, so one rotor fits 1984-1999 hubs as well as 2000 and later hubs
• Offered with 5/16 inch holes for the front or 3/8 inch holes for the rear, so the rotor matches the hardware for its position

Technical Specifications

• Position: Front or Rear (select above)
• Diameter: 11.5 inches
• Thickness: 0.200 inch
• Center Hole: 2.215 inches, with a press-in sleeve to 1.98 inches included
• Mounting Holes: Front 5/16 inch, Rear 3/8 inch
• Material: 410 stainless steel
• Finish: Polished
• Design: 5 spoke
• Weight: 4.0 pounds
• Country of Origin: USA
• Sold As: Each (one rotor with sleeve)

Fitment Notes

• Choose the position above: The front rotor has 5/16 inch mounting holes and the rear rotor 3/8 inch mounting holes.
• 1984-1999 hubs use the included press-in sleeve to bring the center hole to 1.98 inches; 2000 and later hubs take the rotor as supplied.
• The front and rear year ranges differ by platform: Compatible with Harley-Davidson Touring 1984-2007 front and 2000-2007 rear, Softail 1984-2014 front and 1984-2017 rear, Dyna 1992-2005 front and 1991-2017 rear, FXR 1984-1994 at both wheels and 1999-2000 at the front, and Sportster 1984-2013 front and 1984-2010 rear.
• Fits the factory springer front end models (FXSTS, FLSTS, FLSTSC, FLSTSB) at both wheels. Does not fit FXSB or FXSBSE models (Breakout), VRSC models or Trike models; the rear rotor does not fit 1986-1999 FLH/FLT models, which use a different rear rotor.
• Always verify your model and year in the Fitment tab before ordering; it carries the model-by-model breakdown for each position.
• This aftermarket part is not manufactured, sponsored, or endorsed by the motorcycle manufacturer.