Brake Fittings
The fittings that finish a brake system: Drag Specialties banjo fittings and ferrules for 3/16 nylon line, Goodridge stainless banjo bolts including the hydraulic brake light switch banjo, Parker tubing, and K&S and Standard Motor Products switches and adapters. If you’re plumbing a Twisted Choppers springer brake kit or a Performance Machine rear caliper, this is where the last pieces come from.
Showing all 23 resultsSorted by popularity
-
Parker 3/16 Inch OD Semi-Rigid Nylon Brake Line Tubing Sold by the Foot
$2.95Semi-rigid 3/16-inch OD NBR/NNR nylon tubing for custom brake and clutch line routing, rated to 625 PSI and compatible with Drag Specialties 1742-series compression fittings. -
Drag Specialties Ferrule for 3/16 Inch Nylon Brake and Clutch Line
$1.95Drag Specialties compression ferrule for 3/16-inch OD nylon brake and clutch line - correct compression sleeve for a leak-free hydraulic connection at standard nylon line fittings. -
Drag Specialties 90 Degree Chrome Steel Banjo Fitting 3/16 Inch Nylon Brake Line
$13.60Chrome steel compression banjo fitting for 3/16 inch O.D. nylon brake lines; the 90-degree right-angle exit solves challenging routing layouts for custom brake and hydraulic clutch fabrication. -
Drag Specialties 35 Degree Chrome Steel Banjo Fitting 3/16 Inch Nylon Brake Line
$13.60Chrome steel compression banjo fitting for 3/16 inch O.D. nylon brake lines; the 35-degree exit angle provides flexible routing options for custom brake and hydraulic clutch fabrication. -
Drag Specialties Straight Chrome Steel Banjo Fitting 3/16 Inch Nylon Brake Line
$12.55Chrome steel compression banjo fitting for 3/16 inch O.D. nylon brake lines; the straight-through exit delivers the cleanest possible routing for custom brake and hydraulic clutch fabrication. -
Drag Specialties Straight Brake Line Fitting 3/16 Inch Nylon Brake Line
$17.80Chrome steel straight-through compression brake line fittings for 3/16 inch O.D. nylon brake lines; available in 1/8" NPT, 3/8-24, and 7/16-24 thread sizes to match your brake system port. -
Goodridge Stainless Steel Hydraulic Brake Light Switch Banjo Bolt
Price range: $29.95 through $31.95Replaces any standard banjo bolt with a built-in hydraulic pressure switch that activates your brake light on first pedal pressure, with no tee fitting or separate switch needed. -
Drag Specialties Chrome Banjo Bolt 3/8-24 x 0.750 Inch
$6.25Chrome-plated 3/8-24 x 0.750 inch banjo bolt with two included washers; a clean direct replacement for master cylinder or caliper banjo brake line connections. -
Drag Specialties 90 Degree Brake Line Fitting 1/8 NPT for 3/16 Nylon Line
$17.80Chrome-plated 90-degree brake line fitting for 3/16 inch OD nylon brake line with 1/8 in. NPT thread; routes brake lines cleanly on custom motorcycle builds. -
Goodridge Brake Banjo Bolt Chrome
Price range: $6.95 through $7.95Goodridge chrome stainless banjo bolts provide a precision-machined hollow bolt path for brake fluid flow - available in 3/8-24, 3/8-24 Long, and 7/16-24 thread sizes. -
Drag Specialties Chrome Banjo Bolt 3/8-24 with Brake Light Switch Mount
$9.40Chrome 3/8-24 banjo bolt with integrated 1/8 in. NPT brake light switch port; replaces the stock bolt and adds stop light switch capability without master cylinder modification. -
Standard Motor Products Hydraulic Brake Light Switch for Harley-Davidson
Price range: $13.95 through $33.95precision-matched hydraulic brake light switch for Harley-Davidson models from 1958 through 2020; choose from four terminal styles to match your brake switch mount. -
K&S Technologies Black Banjo Bolt Hydraulic Brake Light Switch 3/8-24
$39.95Black banjo bolt hydraulic brake light switch in 3/8-24 thread pitch replaces the stock banjo bolt at the master cylinder or caliper with 19-inch pre-installed leads. -
Drag Specialties 90 Degree Banjo Fitting Brake Switch Mount 3/8-10mm
$20.95Integrated brake switch mount banjo fitting at 90 degrees for 3/8 in. or 10mm banjo bolt thread; adds a stop light switch port at the master cylinder without additional tee fittings. -
Drag Specialties 35 Degree Banjo Fitting Brake Switch Mount 3/8-10mm
$20.95Integrated brake switch mount banjo fitting at 35 degrees for 3/8 in. or 10mm banjo bolt thread; adds a stop light switch port directly at the master cylinder without additional tee fittings. -
Goodridge -3 AN to 1/8-27 NPT Male 90-Degree Chrome Brake Line Fitting
$10.95Goodridge 90-degree chrome fitting adapts 1/8-27 NPT caliper or master cylinder ports to -3 AN braided stainless brake lines for custom motorcycle brake builds. -
Goodridge Brake Light Banjo Bolt 90 Degree Rubber Boot
$3.9590-degree rubber protective boot for Goodridge brake light banjo bolts shields switch wiring from abrasion and cleans up the banjo bolt appearance on any pressure switch application. -
Goodridge 35-Degree Brake Banjo Fitting -3 AN Male Chrome
Price range: $9.95 through $13.95Goodridge 35-degree -3 AN male chrome banjo brake fitting - precision-machined seating faces and chrome plating for clean, leak-free custom motorcycle brake line assemblies. -
Goodridge 90-Degree Brake Banjo Fitting -3 AN Male Chrome
Price range: $13.95 through $14.95Goodridge 90-degree -3 AN male chrome banjo brake fitting - precision-machined seating faces and chrome plating for clean, leak-free custom motorcycle brake line assemblies. -
Goodridge Straight Brake Banjo Fitting -3 AN Male Chrome
Price range: $9.95 through $21.95Straight -3 AN male chrome brake line banjo fittings from Goodridge - available in 3/8-inch (10mm), 7/16-inch, and 12mm thread sizes for hydraulic brake system connections. -
Goodridge 3 AN Male 3 Way T Chrome Brake Line Fitting For Harley Dual Disc
$14.95Goodridge chrome -3 AN three-way T-fitting for custom dual front disc setups, splitting a single master cylinder output into two caliper connections with a compact profile and precision leak-free fit. -
Goodridge -3 AN to 1/8-27 NPT Male Straight Chrome Brake Line Fitting Adapter
$9.95Chrome -3 AN to 1/8-27 NPT straight male adapter from Goodridge connects AN brake hoses to NPT master cylinder and caliper ports with a precision leak-free fit for custom motorcycle builds. -
Goodridge -3 AN to 1/8-27 NPT Male 45-Degree Chrome Brake Line Fitting
$26.95Goodridge 45-degree chrome fitting adapts 1/8-27 NPT caliper or master cylinder ports to -3 AN braided stainless brake lines for custom motorcycle brake builds.
Showing all 23 resultsSorted by popularity