Antigravity Batteries RE-START Lithium Battery Motorcycle Powersports With Built-In Jump Start

Price range: $144.99 through $449.99

-

Free Shipping $99+

Usually Ships Within 1 - 3 Business Days
SKU: WPN-100367 Brand: Antigravity Batteries

Antigravity Batteries RE-START Lithium Battery Motorcycle Powersports With Built-In Jump Start

A dead battery doesn’t care about your timeline or how far you are from home. The Antigravity Batteries RE-START Lithium Battery uses intelligent monitoring to hold reserve energy, then restarts your vehicle on demand with a single button press – eliminating dead battery emergencies without a jump pack or a roadside call.

Key Features
  • World’s first powersport battery with built-in jump starting – RE-START Technology intelligently monitors charge status and enters sleep mode before full discharge, preserving enough energy to restart your vehicle on demand
  • One-button RE-START recovery – press the button on the battery, start the vehicle, and ride away with no jump pack or external power source required
  • Up to 70% lighter than equivalent OEM lead-acid batteries, improving handling, reducing unsprung weight, and shortening braking distances
  • Delivers up to twice the cranking amps of comparable lead-acid batteries in the same case size
  • Full Battery Management System (BMS) with over-discharge, over-charge, thermal, and real-time cell-balancing protection – the first full BMS offered on a powersport battery
  • 4-terminal design accepts right or left-hand positive or negative connections for flexible installation in virtually any vehicle
  • Mountable in any orientation – sealed LiFePO4 chemistry means no liquids, no spills, and no position restrictions
  • Low self-discharge: holds charge up to 3x longer in storage compared to lead-acid; check every 4-6 months when connected to vehicles with parasitic draws (alarms, ECUs, GPS, heated grips)
  • RE-START Remote accessory (sold separately) activates built-in jump starting via SAE charging pigtail without requiring seat or panel removal on difficult-access installations
  • LiFePO4 (Lithium Iron Phosphate) chemistry – no acid, no lead, no cadmium, no mercury
  • Available in 9 OEM-matched case sizes from YTZ7S through YTX30 – standard (RS) and Heavy Duty (HD-RS) variants share case dimensions, while HD-RS delivers higher cranking amps and greater capacity
  • 3-year prorated warranty from Antigravity Batteries (registration required within 30 days of purchase)
Technical Specifications
  • Voltage: 12V
  • Chemistry: LiFePO4 (Lithium Iron Phosphate)
  • Terminal Design: 4-terminal; accommodates right or left-hand positive or negative connections
  • Battery Management System: Full BMS – over-discharge protection, over-charge protection, thermal protection, real-time cell balancing
  • Mounting Orientation: Any orientation; sealed – no liquids
  • Charger Requirement: Lithium-specific motorsport charger required; do not use lead-acid chargers
  • Vehicle Compatibility: Post-1985 motorcycles and powersport vehicles equipped with a solid-state voltage regulator
  • Warranty: 3-year prorated (must register within 30 days of purchase at antigravitybatteries.com)
Fitment Notes
  • Select the model that matches your current OEM battery part number – refer to the Fitment tab for the complete case-size cross-reference table
  • Not recommended for custom V-Twin applications with motors over 103ci or high-compression modified engines; use ATX20-RS, ATX30-RS, or larger variants for these applications
  • Not compatible with pre-1985 motorcycles unless the charging system has been updated to a solid-state voltage regulator
  • Not for use with personal watercraft (PWC) or in deep-cycle applications
  • Not recommended for standard street-use automobiles; consult Antigravity Batteries for race-only automotive applications
  • Battery ships at approximately 30% charge per lithium shipping regulations – charge fully before first use with a lithium-specific charger
  • Ships via ground to the 48 contiguous United States only – no air shipping, no delivery to Alaska, Hawaii, or Puerto Rico
  • Review the Fitment tab for complete OEM cross-reference and model-by-model specification breakdown
Model Selection by OEM Battery Size
Match your current battery's OEM part number to the appropriate Antigravity model below. Standard (RS) and Heavy Duty (HD-RS) variants share the same case dimensions - the HD-RS delivers higher cranking amps and greater amp-hour capacity in the same footprint.
Model Replaces OEM Battery Sizes Cranking Amps Amp Hours (PbEq) Weight
YTZ7S Case - 4.53 x 2.75 x 3.35 in (L x W x H)
ATZ7-RS YTZ7S, YTZ5 150 CA 7 Ah 1.3 lbs
YT7B-BS Case - 5.75 x 2.50 x 3.75 in (L x W x H)
AT7B-BS-RS YT7B-BS, YT9B-BS 180 CA 7 Ah 1.5 lbs
YTZ10S Case - 5.90 x 3.46 x 3.62 in (L x W x H)
ATZ10-RS YTZ10S, YTZ12, YTZ14, YTX9, YTX7A-BS, YTX12A-BS 360 CA 12 Ah 2.6 lbs
ATZ10-HD-RS YTZ10S, YTZ12, YTZ14, YTX9, YTX7A-BS, YTX12A-BS 525 CA 18 Ah 3.15 lbs
YT12-BS Case - 5.90 x 2.75 x 5.12 in (L x W x H)
AT12BS-RS YT12-BS, YT12B-BS, YT12B-4, YT14-BS, YT14B-BS, YT14B-4 360 CA 12 Ah 2.3 lbs
YTX12 Case - 5.90 x 3.38 x 5.19 in (L x W x H)
ATX12-RS YTX12, YTX12-BS, YTX14, YTX14-BS, YTX14H-BS, YTX14L-BS, YTX16-BS, YTX20CH-BS 360 CA 12 Ah 2.6 lbs
ATX12-HD-RS YTX12, YTX12-BS, YTX14, YTX14-BS, YTX14H-BS, YTX14L-BS, YTX16-BS, YTX20CH-BS 480 CA 16 Ah 3.0 lbs
YTX20 Case - 6.89 x 3.40 x 5.12 in (L x W x H)
ATX20-RS YTX15, YTX15L, YTX20, YTX20L, YTX20H, YTX20HL, YTX20-BS, YTX20H-BS, YTX20L-BS, GYZ20H, GYZ20L, GYZ20HL 680 CA 20 Ah 3.8 lbs
YTX30 Case - 6.50 x 5.00 x 6.89 in (L x W x H)
ATX30-RS YTX30, YTX30L-BS, YIX30L-BS, YIX30HL, GYZ32HL, HVT-2 880 CA 32 Ah 5.75 lbs
Weight N/A
Dimensions N/A
Model

ATZ7-RS (YTZ7S), AT7B-BS-RS (YT7B-BS), ATZ10-RS (YTZ10S), ATZ10-HD-RS (YTZ10S – High Capacity), ATX12-RS (YTX12), AT12BS-RS (YT12-BS), ATX12-HD-RS (YTX12 – High Capacity), ATX20-RS (YTX20), ATX30-RS (YTX30)

Q & A

Ask a question
There are no questions yet