Air & Fuel

Showing 97–120 of 132 resultsSorted by popularity

S&S Cycle Pump Actuator Lever
$14.95
A genuine S&S Cycle pump actuator lever for service-replacement use on the host S&S Cycle application; This is a replacement part for S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle.
S&S Cycle Intake Manifold O-Rings – S&S Manifold Fits Harley-Davidson Big Twin Sportster 1984-Up
$61.95
This 10-pack fits S&S manifold configurations on 1984-Up Harley-Davidson Big Twin and 1984-Up Sportster models. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Fast Idle Pick Up Tube
$10.95
A single S&S Cycle replacement fast idle pick-up tube for S&S Super E and Super G carburetors equipped with a fast idle assembly. Made in the U.S.A. by S&S Cycle.
S&S Cycle Breather Gear Spacing Shim Kit Fits Harley-Davidson Big Twin 1984-1999
$49.95
This kit is designed to fit adjusting breather gear end play on 1984-1999 Harley-Davidson Big Twin engines. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Main Jet Tool
$27.95
A genuine S&S Cycle main jet tool for service-replacement use on the host S&S Cycle application; This product does not require model-specific selection. Made in the U.S.A. by S&S Cycle.
S&S Cycle Fuel Inlet Seat
$18.95
A genuine S&S Cycle fuel inlet seat for service-replacement use on the host S&S Cycle application; This is a replacement part for S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle.
S&S Cycle Enrichment Device
$44.95
A single S&S Cycle replacement enrichment device for the cold-start enrichment circuit on S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle.
S&S Cycle Throttle Spool
$23.95
A genuine S&S Cycle throttle spool for service-replacement use on the host S&S Cycle application; This is a replacement part for S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle.
S&S Cycle Swivel Head Bowl Vent Screw
$6.95
A genuine S&S Cycle swivel head bowl vent screw for service-replacement use on the host S&S Cycle application; This product does not require model-specific selection. Made in the U.S.A. by S&S Cycle.
S&S Cycle Slotted Pan Head Screws
$9.95
A 10-pack of S&S Cycle 10-24 x 1/4 inch slotted pan head screws for general-purpose service and assembly on S&S Super-series carburetors and related hardware.
S&S Cycle Slotted Flat Head Screws
$13.95
A 10-pack of S&S Cycle 8-32 x 5/8 inch slotted flat head service screws that cross-reference OEM 59904-80, general-purpose hardware for S&S carburetor and engine-cover service.
S&S Cycle Replacement CV Adapter Backplate Gasket
$8.95
A single S&S Cycle 0.0625-inch CV adapter backplate gasket compatible with S&S Super E, Super G, and CV adapter backplate interfaces. Made in the U.S.A. by S&S Cycle.
S&S Cycle Pump Actuator Arm
$8.95
This pump actuator arm is a direct replacement for the accelerator pump actuator on S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Plunger Nut for Super E and Super G Carburetors 5-Pack
$19.95
This 5-pack of plunger nuts secures the fast idle plunger in the body of S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Float Bowl Slotted Screws
$19.95
A 10-pack of S&S Cycle 10-24 x 3/4 inch zinc-plated slotted float bowl screws with lock washers, sized for S&S Super B, Super E, and Super G carburetor float bowls.
S&S Cycle Float Bowl Gasket
$28.95
This 10-pack of gas-type bowl gaskets fits the float bowl interface on S&S Super B and Super D carburetors. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Ejector Nozzle Tube
$14.95
A single S&S Cycle ejector nozzle tube, sized as a direct replacement for the nozzle tube in S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle.
S&S Cycle Carburetor Swivel Fuel Inlet
$40.95
A single S&S Cycle permeation-compliant swivel fuel inlet for the fuel-inlet position on S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle.
S&S Cycle Carburetor Float Pins
$12.95
This 5-pack of float pivot pins fits the wire-type float assembly on S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Bowl Gaskets
$8.95
This float bowl gasket seals the bowl-to-body interface on S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Accelerator Pump Check Balls
$10.95
This 10-pack of check balls fits the accelerator pump circuit on S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Accelerator Pump Cap Assembly
$40.95
This accelerator pump cap assembly is a direct replacement for the cap on S&S Super E and Super G carburetors. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle Fuel Line Insulator
$40.95
This 12-inch fuel line insulator is a universal-fit thermal protection component and does not require model-specific selection. Made in the U.S.A. by S&S Cycle for service-replacement use.
S&S Cycle VOES Oil Return Hose
$8.95
This 9-inch VOES oil return hose does not require model-specific selection and is sized for standard VOES vacuum port oil return routing. Made in the U.S.A. by S&S Cycle for service-replacement use.

Showing 97–120 of 132 resultsSorted by popularity